UCC5642MWPG4

UCC5642MWPG4 Overview

The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. The 36-BSOP (0.295, 7.50mm Width) is well known in the electronic industry due to its low package cost. Materials used for packaging are the same as those used by Tube. It is mounted on a PCB using Surface Mount. It is not recommended to exceed 0°C~70°C for the Operating Temperature. SCSI, LVD-qualified material suitable for standard applications. A 2.7V~5.25V Supply Voltage is provided to ensure normal operation. Base Part Number UCC5642 is useful for finding related parts. Specific uses are provided with 36 pins. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. In order to maintain high efficiency, the supply voltage should be kept at 5V. The Surface Mount-mount is attached to it. A subcategory of Subcategory Bus Terminators contains it. There are pronged contacts on 36 pins, which are used in computers and other communication devices. It is necessary to have 3/55V Power Supplies in order for the system to operate. Here, 105Ohm is the resistance of the electrical device. This device can operate at voltages of 40mA, making it an excellent choice for a wide range of applications. For 5.25V to fully function, it requires current supply.

UCC5642MWPG4 Features

9 terminations
Tube package
UCC5642 family
36 pin count
9 signal lines
36 pins
3/55V power supplies

UCC5642MWPG4 Applications

There are a lot of Texas Instruments UCC5642MWPG4 Signal Terminators applications.

• Set-top boxes
• Disk array (RAID)
• Telecommunication Equipment
• Data Routers
• ESD protection and termination of USB downstream ports downstream ports
• Notebooks
• Compact disk drives
• tape drives
• IEC61131-2 type 1, 2 and 3
• Remote input module