UCC5642MWPTRG4

UCC5642MWPTRG4 Overview

A 9 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. Because of its low package cost, the 36-BSOP (0.295, 7.50mm Width) is widely used in the electronic industry. Material choices are based on Tape & Reel (TR)'s. Using Surface Mount, you mount it on a PCB. There should be no more than 0°C~70°C operating temperature. The material meets SCSI, LVD-qualification for standard applications. Ensure normal operation with the 2.7V~5.25V Supply Voltage. The Base Part Number UCC5642 can be used to find related parts. For specific uses, 36 pins are included. These lines are devoted exclusively to the transmission of signals or intelligence and are either public or private. High efficiency requires a constant voltage supply of 5V. There is a Surface Mount-mount on it. In the Subcategory Bus Terminators, it belongs. 36 pins, which are pronged contacts, are used in computers and other communications devices. It is necessary to have 3/55V Power Supplies in order for the system to operate. Its resistance is 105Ohm (Ω). This device is a great choice for a wide variety of applications due to its ability to operate at voltages of 40mA. 5.25V needs a continuous supply current in order to function properly.

UCC5642MWPTRG4 Features

9 terminations
Tape & Reel (TR) package
UCC5642 family
36 pin count
9 signal lines
36 pins
3/55V power supplies

UCC5642MWPTRG4 Applications

There are a lot of Texas Instruments UCC5642MWPTRG4 Signal Terminators applications.

• Compact disk drives
• personal computers
• tape drives
• Disk array (RAID)
• Programmable logic controller and remote input modules
• Data Routers
• High speed protected termination for digital input with serialized SPI output
• plotters
• Storage area networks (SAN)
• Data Switches