UCC5670MWP

UCC5670MWP Overview

The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. In the electronic industry, the 36-BSOP (0.295, 7.50mm Width) has a reputation for being economical. Material choices are based on Tube's. It is mounted on a PCB using Surface Mount. There should not be an increase in Operating Temperature over 0°C~70°C. For standard applications, it is SCSI, LVD, SE-qualified. Ensure normal operation by providing a 2.7V~5.25V Supply Voltage. If you are looking for related parts, you can use Base Part Number UCC5670. There are a number of 36 pins included for specific applications. Signal lines such as 9 are used for signals or intelligence transmission and are devoted exclusively to public or private service. It is important to maintain the supply voltage at 3.3V in order to achieve high efficiency. Surface Mount-mounts are on it. There is a place for it in Subcategory Bus Terminators. The pronged contacts used in computers and other communication devices are called 36 pins. Operating 3/5V Power Supplies is required. Here is the resistance of this electrical device (105Ohm). It is necessary to supply 5.25V with current so that it can function properly.

UCC5670MWP Features

9 terminations
Tube package
UCC5670 family
36 pin count
9 signal lines
36 pins
3/5V power supplies

UCC5670MWP Applications

There are a lot of Texas Instruments UCC5670MWP Signal Terminators applications.

• SCSI cable
• Optical disk drives
• plotters
• Server and workstation
• Notebooks
• Disk array (RAID)
• Data Switches
• Data Routers
• Remote input module
• IEC61131-2 type 1, 2 and 3