UCC5672PWP

UCC5672PWP Overview

A 9 termination occurs when a transmission line is terminated with a device that matches its characteristic impedance. Its low package cost makes it well known in the electronics industry. Packaging follows Tube's material specifications. The mounting on the PCB is done with Surface Mount. There should not be an increase in Operating Temperature over 0°C~70°C. A SCSI, LVD, SE-qualified material, it can be used for standard applications. Ensure normal operation with the 2.7V~5.25V Supply Voltage. The Base Part Number UCC5672 can be used to find related parts. For specific purposes, 28 pins are included. It can be a public or a private signal or communication line and its sole purpose is for transmission of signals and intelligence. Keeping the supply voltage at 3.3V is essential for high efficiency. Surface Mount-mounts are on it. This falls under Subcategory Bus Terminators. 28 pins, which are pronged contacts, are used in computers and other communications devices. Operating 3/5V Power Supplies is required. Here is the resistance of this electrical device (105Ohm). This device is a great choice for a wide variety of applications due to its ability to operate at voltages of 23mA. When the part is in the field, it can have up to 1 eligible receivers/drivers. In order to operate, it needs a maximum current of 35mA.

UCC5672PWP Features

9 terminations
Tube package
UCC5672 family
28 pin count
9 signal lines
28 pins
3/5V power supplies

UCC5672PWP Applications

There are a lot of Texas Instruments UCC5672PWP Signal Terminators applications.

• CD-ROM drives
• Telecommunication Equipment
• Data Routers
• PCI Cards
• Storage area networks (SAN)
• Programmable logic controller
• IEC61131-2 type 1, 2 and 3
• Data Networking
• mainframes
• Remote input module