UCC5673MWP

UCC5673MWP Overview

The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. Its low package cost makes it well known in the electronics industry. Tube's packaging follows her materials. The mounting on the PCB is done with Surface Mount. Temperatures up to 0°C~70°C are considered to be maximums. Standard applications can be carried out with this SCSI, LVD, SE-qualified material. A 2.7V~5.25V Supply Voltage is provided to ensure normal operation. It is possible to find related parts using Base Part Number UCC5673. It is intended to use the 36 pins for a specific purpose. Signal lines such as 9 are used for signals or intelligence transmission and are devoted exclusively to public or private service. It is important to maintain the supply voltage at 3.3V in order to achieve high efficiency. It is attached to a Surface Mount-mount. A subcategory of Subcategory Bus Terminators contains it. Computers and other communications devices use 36 pins, which are pronged contacts. Operating 3/5V Power Supplies is required. Here, the resistance is 105Ohm (Ω). A certain amount of current is required by 5.25V in order to work properly.

UCC5673MWP Features

9 terminations
Tube package
UCC5673 family
36 pin count
9 signal lines
36 pins
3/5V power supplies

UCC5673MWP Applications

There are a lot of Texas Instruments UCC5673MWP Signal Terminators applications.

• PCI Cards
• mainframes
• Remote input module
• CD-ROM drives
• laser printers
• Disk array (RAID)
• Data Networking
• Telecommunication Equipment
• personal computers
• Data Routers