UCC5673PWP

UCC5673PWP Overview

An example of a 9 termination would be one in which the characteristic impedance of the transmission line is matched to the device terminating the transmission line. A well-known feature of the 28-PowerTSSOP (0.173, 4.40mm Width) is its low packaging cost. Materials are taken from Tube's packaging. On Surface Mount, a PCB can be mounted. It is recommended that the Operating Temperature not exceed 0°C~70°C. This is a standard-qualified material. The 2.7V~5.25V Supply Voltage ensures normal operation. A Base Part Number UCC5673 can help you find related parts. There are specific uses for the 28 pins. Signal lines, or 9 lines, are those dedicated to the transmission of signals or intelligence while being public or private. Maintaining a constant supply voltage is key to high efficiency. On the back is a Surface Mount-mount. A subcategory Bus Terminators is appropriate for it. There are pronged contacts on 28 pins, which are used in computers and other communication devices. A 3/5V Power Supply is required to operate the system. This electrical device has a resistance of 105Ohm (Ω). As the device can operate at supply voltages of 23mA, it is suitable for a wide range of applications. When the part is in the field, it can have up to 1 eligible receivers/drivers.

UCC5673PWP Features

9 terminations
Tube package
UCC5673 family
28 pin count
9 signal lines
28 pins
3/5V power supplies

UCC5673PWP Applications

There are a lot of Texas Instruments UCC5673PWP Signal Terminators applications.

• USB hubs
• CSU and DSU
• tape drives
• SCSI cable
• Disk array (RAID)
• Compact disk drives
• laser printers
• Desktop PCs
• Network attached storage (NAS)
• Programmable logic controller and remote input modules