UCC5686PMG4

UCC5686PMG4 Overview

A 27 termination occurs when a transmission line is terminated with a device that matches its characteristic impedance. Because of the low cost of its packages, the 64-LQFP is well known in the electronic industry. Tray's packaging is made of the same materials. It is possible to mount PCBs on Surface Mount. It should not exceed 0°C~70°C°C when operating. It is a SCSI, LVD-qualified material for standard applications. Normal operation is ensured by a 2.7V~5.25V Supply Voltage. If you are looking for related parts, you can use Base Part Number UCC5686. A specific purpose is served by the 64 pins. Signal lines, or 27 lines, are those dedicated to the transmission of signals or intelligence while being public or private. It is important to maintain the supply voltage at 5V in order to achieve high efficiency. In addition to the Surface Mount-mount, there is an S-mount. There is a place for it in Subcategory Bus Terminators. Contacts with 64 pins are used in computers and other communications devices. It is necessary to use 3/5V Power Supplies to operate this system. Here, the resistance is 105Ohm (Ω). As the device can operate at supply voltages of 65mA, it is suitable for a wide range of applications. To function fully, 5.25V needs a supply current.

UCC5686PMG4 Features

27 terminations
Tray package
UCC5686 family
64 pin count
27 signal lines
64 pins
3/5V power supplies

UCC5686PMG4 Applications

There are a lot of Texas Instruments UCC5686PMG4 Signal Terminators applications.

• CSU and DSU
• Set-top boxes
• plotters
• Compact disk drives
• laser printers
• personal computers
• PCI Cards
• Data Networking
• Network attached storage (NAS)
• Programmable logic controller and remote input modules