UCC5687PMG4

UCC5687PMG4 Overview

Termination with a 27 device, which matches the transmission line's characteristic impedance, is considered a 27 termination. Its low package cost makes it well known in the electronics industry. Packaging follows Tray's material specifications. Using Surface Mount, you mount it on a PCB. It is not recommended to exceed 0°C~70°C for the Operating Temperature. This material is SCSI, LVD-qualified for use in standard applications. Ensure normal operation by providing a 2.7V~5.25V Supply Voltage. It is possible to find related parts using Base Part Number UCC5687. A specific purpose is served by the 64 pins. It can be a public or a private signal or communication line and its sole purpose is for transmission of signals and intelligence. In order to maintain high efficiency, the supply voltage should be kept at 5V. On it there is a Surface Mount-mount. There is a place for it in Subcategory Bus Terminators. There are pronged contacts on 64 pins, which are used in computers and other communication devices. In order to operate, 3/5V Power Supplies are required. This electrical device has a resistance of 105Ohm. To fully perform 5.25V's functions, it must receive its supply current.

UCC5687PMG4 Features

27 terminations
Tray package
UCC5687 family
64 pin count
27 signal lines
64 pins
3/5V power supplies

UCC5687PMG4 Applications

There are a lot of Texas Instruments UCC5687PMG4 Signal Terminators applications.

• PCI Cards
• USB hubs
• tape drives
• plotters
• High speed protected termination for digital input with serialized SPI output
• Telecommunication Equipment
• Network attached storage (NAS)
• Remote input module
• laser printers
• Optical disk drives