UCC5696PNG4

UCC5696PNG4 Overview

A 27 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. 80-LQFP is well known for its low package cost in the electronics industry. Packaging follows Tray's material specifications. The PCB is mounted using Surface Mount. A maximum operating temperature of 0°C~70°C should not be exceeded. This is a standard-qualified material. Ensure normal operation with the 2.7V~5.25V Supply Voltage. Using Base Part Number UCC5696 will allow you to find related parts. Specific uses are provided with 80 pins. These lines are devoted exclusively to the transmission of signals or intelligence and are either public or private. If you want the supply voltage to be as high as possible, you should maintain it at 3.3V. Surface Mount-mounts are on it. A subcategory Bus Terminators is appropriate for it. Communication devices such as computers use 80 pins, which are pronged contacts. It is necessary to have 3/5V Power Supplies in order for the system to operate. This device has a resistance of 105Ohm (Ω). This device is ideal for a wide range of applications since it can operate with 65mA supply voltages. The supply current for 5.25V is required in order for it to function effectively.

UCC5696PNG4 Features

27 terminations
Tray package
UCC5696 family
80 pin count
27 signal lines
80 pins
3/5V power supplies

UCC5696PNG4 Applications

There are a lot of Texas Instruments UCC5696PNG4 Signal Terminators applications.

• Network attached storage (NAS)
• laser printers
• Remote input module
• Disk array (RAID)
• Programmable logic controller and remote input modules
• personal computers
• Desktop PCs
• tape drives
• Storage area networks (SAN)
• High speed protected termination for digital input with serialized SPI output