VFC320CPG4

VFC320CPG4 Overview

This package is embedded in the 14-DIP (0.300, 7.62mm) package. Electronic parts such as this are mounted in the direction of Through Hole. It is packaged in the way of Tube. An electrical device of the type Volt to Frequency and Frequency to Volt is being used. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a 14 pin count on this device. An electrical supply of voltage 15V supplies power to the device. As a result of the base part number, the related parts can be identified. When a computer or other communication device is attached to a signal interface, there are 14 pins, which are pronged contacts. The temperature at which the device operates must not exceed -25°C in order for it to ensure reliability. To ensure the reliability of the device, the maximum operating temperature is 85°C. Mounted in the way of Through Hole. Analog Special Function Converters contains this part. 1MHz is the frequency at which it operates. This electrical device requires a supply voltage of 15V. A dual supply voltage of 15V is used to power the device. This electronic part has the supply type Dual. An electronic part with a negative input type of -10V has the maximum negative input type. It operates with the maximal supply current of 7.5mA.

VFC320CPG4 Features

14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 15V
The maximal supply current of 7.5mA

VFC320CPG4 Applications

There are a lot of Texas Instruments VFC320CPG4 V/F & F/V Converters applications.

• Frequency-to-Voltage Conversion (Tachometer)
• FM Demodulation
• Clutch Control
• Low-Cost Analog-to-Digital Conversion
• Speedometers
• Isol ated data transmission
• Analog Data Transmission and Recording
• Serial frequency output
• Frequency to Voltage Conversions
• Voltage to Frequency Conversions