Products
You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The
basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and
country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.Parameters | |
---|---|
Factory Lead Time | 12 Weeks |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 16-SOIC (0.154, 3.90mm Width) |
Number of Pins | 16 |
Operating Temperature | -40°C~150°C TJ |
Packaging | Tube |
Series | VIPer™ plus |
JESD-609 Code | e4 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 16 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory | Switching Regulator or Controllers |
Power Rating | 12W |
Max Power Dissipation | 20W |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 14V |
Base Part Number | VIPER26 |
Pin Count | 16 |
Supply Voltage-Max (Vsup) | 23.5V |
Number of Channels | 1 |
Analog IC - Other Type | ANALOG CIRCUIT |
Nominal Supply Current | 600μA |
Output Current | 1A |
Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
Topology | Flyback |
Min Input Voltage | 85V |
Control Mode | CURRENT-MODE |
Frequency - Switching | 60kHz |
Max Input Voltage | 265V |
Internal Switch(s) | Yes |
Fault Protection | Current Limiting, Over Temperature |
Max Duty Cycle | 80 % |
Duty Cycle | 70% |
Output Isolation | Either |
Voltage - Breakdown | 800V |
Voltage - Start Up | 13V |
Height | 1.5mm |
Length | 10mm |
Width | 4mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The VIPER26LD is a smart high voltage converter that integrates an 800 V avalanche-rugged power MOSFET with PWM current mode control. The VIPER26LD power MOSFET with 800 V breakdown voltage allows an extended input voltage range to be applied, as well as the size of the DRAIN snubber circuit to be reduced. This VIPER26LD IC meets the most stringent energy-saving standards with very low consumption and burst mode operation under light load.
800 V avalanche rugged power MOSFET allows a wide range of VAC input range to be covered
Embedded HV startup and sense-FET
The current mode PWM controller
Minimized system input power consumption:
– Less than 30 mW @ 230 VAC in no-load condition
– Less than 400 mW @ 230 VAC with 250 mW load
Limiting current with adjustable set point
Jittered switching frequency to reduce the EMI filter cost:
– 60 kHz ±4 kHz (L type)
– 115 kHz ±8 kHz (H type)
Embedded error amplifier
Hysteretic thermal shutdown
Built-in soft-start for improved system reliability
Protections with automatic restart: overload/short-circuit (OLP), feedback loop disconnection
Auxiliary power supply for appliances
Power metering
LED drivers
SMPS for set-top boxes, DVD players, and recorders
Products