English

All Products

View All >>
  • VND600SPTR-E

VND600SPTR-E

N-Channel PMIC VND600 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-VND600SPTR-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 788
  • Description: N-Channel PMIC VND600 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 96.1W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 13V
Base Part Number VND600
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 25A
Interface On/Off
Nominal Supply Current 6mA
Output Configuration High Side
Power Dissipation 96.1W
Output Current 25A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 6mA
Input Type Non-Inverting
Turn On Delay Time 30 μs
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Nominal Input Voltage 13V
Turn-Off Delay Time 30 μs
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 30m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 18 Weeks
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10

VND600SPTR-E Overview


It is package in Tape & Reel (TR) case.There is a package for it in the PowerSO-10 Exposed Bottom Pad package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 2.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The VND600 family contains this object.It has a total of 10 terminations.The 10 pins are used for the operation of the system.The LED driving board has a total of 2 functions.This operation requires the maximum output current to be decreased to 25A.As long as the supply voltage is 13V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 10 pins.Currently, the LED driving board has 30mOhm resistance.In this case, the output current is set to 25A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum input voltage is 36V volts.As a minimum input voltage, it requires 5.5V volts.This system has a maximum current requirement of 6mA.

VND600SPTR-E Features


Supplied from 13V
Resistance of 30mOhm

VND600SPTR-E Applications


There are a lot of STMicroelectronics VND600SPTR-E Power Switches ICs applications.

  • Hard Disk Drives
  • PC Card Hot Swap
  • Telecom and Network Systems
  • Hot Swaps
  • Set-Top Boxes
  • Wireless Modem Data Cards
  • USB Power Distribution
  • Set-top-box
  • USB Protection
  • HDD and SSD