All Products

VNP10N07

N-Channel PMIC OMNIFET?, VIPower? Series VNP10N 3 Pin TO-220-3


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-VNP10N07
  • Package: TO-220-3
  • Datasheet: PDF
  • Stock: 661
  • Description: N-Channel PMIC OMNIFET?, VIPower? Series VNP10N 3 Pin TO-220-3 (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-3
Number of Pins 3
Weight 2.240009g
Packaging Tube
Series OMNIFET™, VIPower™
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Resistance 100mOhm
Terminal Finish Matte Tin (Sn)
Voltage - Rated DC 70V
Max Power Dissipation 50W
Technology MOS
Terminal Position SINGLE
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Reach Compliance Code not_compliant
Current Rating 10A
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number VNP10N
Pin Count 3
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 7A
Operating Supply Voltage 18V
Voltage 70V
Interface On/Off
Nominal Supply Current 250μA
Current 10A
Output Configuration Low Side
Power Dissipation 31W
Output Current 7A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 250μA
Input Type Non-Inverting
Switch Type General Purpose
Output Characteristics OPEN-DRAIN
Drain to Source Voltage (Vdss) 70V
Continuous Drain Current (ID) 10A
Output Polarity TRUE
Ratio - Input:Output 1:1
Input Characteristics SCHMITT TRIGGER
Voltage - Load 55V Max
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage 70V
Turn On Time 0.9 μs
Load Current 10A
Output Peak Current Limit-Nom 10A
Rds On (Typ) 100m Ω (Max)
Drain to Source Resistance 100mOhm
Turn Off Time 6 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height 15.75mm
Length 10.4mm
Width 4.6mm
RoHS Status ROHS3 Compliant

VNP10N07 Overview


The package is in the form of a Tube.It is included in the package TO-220-3.It has been mounted as Through Hole on the LED driver.General Purpose is the switch type it owns.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is part of the VNP10N family of LED drivers.In total, there are 3 terminations.For operation, we use the 3 pins.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 7A to meet the operation criteria.Through Hole is mounted in the way of this lighting driver.The LED driver has a total of 3 pins.There is 100mOhm resistance on the LED driver.It is part of the OMNIFET?, VIPower? series.This case has the output current set to 7A.In order to maximize efficiency, the supply voltage should be set at 18V.A maximum current requirement of 250μA is required for its operation.

VNP10N07 Features


Resistance of 100mOhm

VNP10N07 Applications


There are a lot of STMicroelectronics VNP10N07 Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Storage (HDDs, SSDs)
  • Smart Phones, Feature Phones
  • USB Power Distribution
  • Handheld Devices
  • Solid-State Drives
  • Various applications equipped with buttons
  • HDD and SSD
  • Portable GPS
  • Hot Swap