XC17S30XLVOG8I

XC17S30XLVOG8I Overview

FPGA uses a neat 8-SOIC (0.154, 3.90mm Width) package.Packaging outside of Tray.-40°C~85°C-qualified.Using the OTP axis, it can be programmed to do whatever you want.The voltage fed to it is 3V~3.6V.Mounted in Surface Mount is this memory device.A maximum of 300kb bytes of data can be stored.To find other similar parts, search for "XC17S30XL".FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 8 terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.3V must be the minimum voltage supplied to the device.Using MEMORY CIRCUIT memory chips, this is what you get.The temperature should be kept below 260 in reflow soldering.FPGA has pins on the 8 axis.A memory chip can operate at a voltage no greater than 0.005mA.Parts come with 8 pins.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.There is a COMMON configuration for the memory's I/O.Memory is recommended that a 3.3V power supply be used.

XC17S30XLVOG8I Features

Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.

XC17S30XLVOG8I Applications

There are a lot of Xilinx Inc. XC17S30XLVOG8I applications of configuration proms for FPGAs.

• workstations,
• networking
• cell phones
• printers
• graphics card
• networks
• Camcorders
• supercomputers
• DVD disk buffer
• embedded logic