XCF08PFSG48C

XCF08PFSG48C Overview

FPGA uses a nice 48-TFBGA, CSPBGA package that makes FPGA easy to use.Packaging outside of Tray.In the state of -40°C~85°C, licensed to work.Using the In System Programmable axis, it can be programmed to do whatever you want.The voltage is 1.65V~2V.Mounted in Surface Mount is this memory device.Data storage is limited to 8Mb bytes.Other related parts can be found by searching "XCF*P".In order for it to function, it requires a voltage supply of 1.8V.A termination with different functions in the 48 axis.This memory device can be used with a maximum voltage of 2V.Minimum voltage 1.65V is required for the device to work.If you're reflow soldering, you shouldn't go above 260.In this case, it has 48 pins.The memory chip is allowed to operate at a voltage that is no greater than 0.04mA.Parts come with 48 pins.A 1.8V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.This type of memory is called a FLASH memory.In addition, it is suitable for use in Surface Mount-based applications.Swicthing controllers work at 50MHz frequencies.

XCF08PFSG48C Features

Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory
Frequency: 50MHz.

XCF08PFSG48C Applications

There are a lot of Xilinx Inc. XCF08PFSG48C applications of configuration proms for FPGAs.

• eSRAM
• DVD disk buffer
• embedded logic
• personal digital assistants
• data buffer
• hard disk drive (HDD)
• personal computers
• supercomputers
• workstations,
• Camcorders