XCR3256XL-12TQ144Q

XCR3256XL-12TQ144Q Overview

There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.There are 120 I/Os on the board.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 3.3V voltage supply for this device.There is a part in the family [0].There are 144 pins on the chip.If this device is used, you will also be able to find [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.The 144pins are designed into the board.In this case, the maximum supply voltage (Vsup) is 3.6V.It is recommended that the operating temperature be higher than -40°C.There should be a temperature below 125°Cat the time of operation.The logic block consists of 16 l logic blocks (LABs).It is recommended that the maximum frequency be less than 88MHz.Programmable logic types are divided into EE PLD.

XCR3256XL-12TQ144Q Features

TQFP package
120 I/Os
144 pin count
144 pins
16 logic blocks (LABs)

XCR3256XL-12TQ144Q Applications

There are a lot of Xilinx XCR3256XL-12TQ144Q CPLDs applications.

• TIMERS/COUNTERS
• Bootloaders for FPGAs
• Programmable power management
• Voltage level translation
• Synchronous or asynchronous mode
• D/T registers and latches
• White goods (Washing, Cold, Aircon ,...)
• PLC analog input modules
• Address decoders
• State machine control